This package contains a FS-X native conversion of all my original Piaggio P-166 models developed for FS-2002/2004. All versions are included: P-166A, P-166BL-2, P-166CL-2, P-166M, P-166S, P-166DL-3 and P-166DP-1. The 3D models are virtually the same, so these are fairly simple models. Yet they come with a VC (no 2D panel this time!). With respect to the FS-2002/2004 releases, they come with very much improved panels, in two flavors: Piston and Turboprop. Gauges developed by Milton Shupe & Scott Thomas for the Aero Commander / Turbo Commander Aircraft series, and Edgar Guinart López of Aeroproyecto for the Embraer 110. Other Gauges from my own Piaggio P-180 & PD-808. Also Included is a brand-new flight model redeveloped from scratch. The 3D models are mildly improved, with a proper pilot figure, main panel backlighting and bump-mapping. Please refer to the Reference and Checklist pages provided via the FS Kneeboard for flying and operating instructions. Models converted with Arno Gerretsen’s Model Converter X. The Piaggio P-166 is a light small twin. An Exotic twin-engine prop that sold all over the world including America, UK, and Australia. Its origin is traced Back to the Piaggio P-136, a light amphibian, which the P-166 keeps the wings, the engines and the tail planes. The first P-166A flew in November 1957. The aircraft was still in production in the early 21st century in an improved turboprop version, the P-166DP-1.

This package contains an updated re-release of all my original Piaggio P-166 models developed for FS-2002/2004. All versions are included in a single package: P-166A, P-166BL-2, P-166CL-2, P-166M, P-166S, P-166DL-3 and P-166DP-1. The 3D models are the same, so these are fairly simple models. Yet they come with a VC (no 2D panel this time!). With respect to the original releases, they come with very much improved panels, in two flavors: Piston and Turboprop. Gauges developed by Milton Shupe & Scott Thomas for the Aero Commander / Turbo Commander Aircraft series, and Edgar Guinart López of Aeroproyecto for the Embraer 110. Other Gauges from my own Piaggio P-180 & PD-808. Also Included is a brand-new flight model redeveloped from scratch. Please refer to the Reference and Checklist pages provided via the FS Kneeboard for flying and operating instructions. The Piaggio P-166 is a light small twin. An Exotic twin-engine prop that sold all over the world including America, UK, and Australia. Its origin is traced Back to the Piaggio P-136, a light amphibian, which the P-166 keeps the wings, the engines and the tail planes. The first P-166A flew in November 1957. The aircraft was still in production in the early 21st century in an improved turboprop version, the P-166DP-1.

FSX/FSX-SE KBEC Wichita Kansas Beech Factory Airport USA. Redo of the Beechcraft airport factory in Wichita, KS. Read the readme file for installation and information on the redesign of the airport and surrounding area. By Dick Mohatt.

This is a panel update for the Saunders Roe SR-53, designed and posted by Hubert Mueller. It's a great model but definitely deserves better panels. So here is a panel update including all the required gauges as well as automatic exhaust and afterburner effects. As the designer didn't include an E-mail address I couldn't ask his permission but I trust he won't mind me posting the entire package without it - it's always easier for users to get a whole package instead of having to install bits and pieces into an existing package. So this is the whole aircraft. I didn't change anything in the aircraft's look, just the panels and added effects. Thanks to Hubert Mueller for his nice model. Panel update and effects by Michael Pook.

This is based on a real Cessna 170B that my friend flies. Also comes with red cockpit lights. Credits go to A.F Scrub, as this is mostly his model, I just did the repaint. This is my first texture, so it's far from perfect.

Appalachian Trail Adventure Virginia. Please read the PDF file before flying this Mission. This mission is about 8 hours long. I have had ran out of memory several times during this flight so plan to land near a shelter or parking lot and save the mission often and to continue later when you run out of time. Fly the historical Appalachian Trail by each state. This is long distance hiking trail from Georgia to Maine. Along your flight look for each of the shelters were thru hikers sleep on the trail along with many landmarks on the trail. This mission you will be flying the Virginia/West Virgnia section. By David Crandall

. Portugal's flag carrier airline is based at Lisbon Airport and currently has 7 Airbus A330-200 in it's fleet and flies to destinations in Europe, North and South America as well as Africa. Added Garmin G1000 MFD and PFD popups and added FSX Garmin G1000 user maual. Added the better Thomas Ruth VC with updates by Louis Quintero and Chris Evans. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel). Added better views. Added the great textures by Mario Monfrecola. Assembled and tested in P3Dv4.5 and should be ok in FSX and earlier P3D versions by Chris Evans.

FS9 Ozark Airlines DC-3 textures for default DC-3 by Microsoft/Aces. Requires CalClassic DC-3 FS2004 package. Ozark textures by Gary Harper.

This is an extensive model conversion and custom model modification for the stock P3D LM/CS C-130J. The ScorchMod C-130Js came about as a response to the LM/CS models lacking current versions of the C-130J in active service with the US Armed Forces. This modification is for P3DV4+, this will not work in earlier versions of P3D or FSX. This is a true AC-130J Ghostrider, it is not just a combined model with the the stock AC-130. This model is the 3rd iteration of the "ScorchMod" C-130Js. This model has the correct 2 cannon set up, the GAU-23 30mm cannon at the front and the M102 105mm Howitzer at the rear. I have also included 2 model variations a clean version and a loaded version. The clean version has open wing station hardpoints and the loaded version has the true compliment of GBU-39 Small Diameter Bombs that were modeled from scratch. I have also included the Ghostrider's assortment of FLIR cameras and additional communication domes. This model also has previous ScorchMod modifications done to it. Such as night lighting for the formation "slime" lights and other model changes. I have also coded a usable FLIR pod in the belly to mimic the iconic Hercules Gunship view of the target area. The camera is stock with P3D and uses P3D's camera function controls to allow the user to slave and track targets on the ground. The weapon systems though remain inoperable for P3D. I have included 4 custom repaints for the AFSOC liveries for the USAF, 3 with nose art and 1 without. I have also included a glowing propeller tip mod as an optional night lighting option. The real C-130Js do not have these glowing propeller tips (like the MV-22B Osprey) but thought it was an interesting modification for those that want it. This is a component based mod, so you will have to build the aircraft's folder up for the mod to work on your sim. Instructions are included. Model conversion, modification, and repaints by Nicholas "Scorch" Mitchell.

FSX/FS2004 HA-1112 K In 1942, the Spanish government arranged a manufacturing licence with Messerschmitt AG to build the Bf 109G-2. The DB 605A engines, propellers, instruments and weapons were to be supplied from Germany. This proved impossible. In May 1951, a developed version, the HA-1112-K1L, was produced in Spain with the improved Hispano-Suiza, HS 17-12Z engine installation. Its three-bladed de Havilland Hydromatic propeller earned it the nickname Tripala ("three blades"). GMAX mdl by A.F.Scrub.