Flying in this region is considered by IATA as a "Black Cross Region" so they take no members from this area .No world ensurance company works around here so planes and pilots are hard to get. There is a Shuttle service called in Indu " Wings of the Lucky Elephant" or Bugli Air Service. It takes off early in the morning with almost anything like people, chickens, rope, paint gallons, nails and sometimes caged cobras sent out to some witch doctor from the local snake market. This "airline" is not new. Back in 1947 Duart Mooresby started the business with an old 1939 DC-3 and his son continued it in the sixties with another used C-46 and a twin Anson. Now Duarts's grandson is flying the route with a Caribou and the same fixed up DC-3 his grandfather almost got killed in many a time. Flying here is a question on having good eyes and a good butt since flying by the seat of your pants is paramount. There are no radio aids only the two way radio from their shack at the airport. Mountains are all over and the airfields served are located in very pretty but awfully dangerous tiny valleys wedged inside the towering rocks of the said mountains. So why fly here?..The local birds think its nice and there are a lot of worms around the fields. Bugli Air Service has bought a New Twin Otter and you will be delivering it, teaching the two pilots how to fly it in the mountains and finally, if you don't end up in the local Red Cross aid station, get a "Real Bush Pilot" certificate which only Bugly Air provides in this planet. It is said, down in South Africa, that if you get this certificate you can fly like an eagle anywhere in the whole wide planet. Good luck Piloto

USA South East USGS 10 metre mesh terrain - FSX only. This constitutes 10 metre terrain mesh for a section of the USA, The whole USA East mesh files will abutt the US West Coast 10m mesh already available, that was made by: Raimondo Taburet. Make sure you have your scenery terrain settings at about 5 metres in the FSX display dialogue for the mesh to show properly! Includes: NM, TX, LA, MS, AL, FL, GA, SC.

USA South East USGS 10 metre mesh terrain - FSX only. This constitutes 10 metre terrain mesh for a section of the USA, The whole USA East mesh files will abutt the US West Coast 10m mesh already available, that was made by: Raimondo Taburet. Make sure you have your scenery terrain settings at about 5 metres in the FSX display dialogue for the mesh to show properly! Includes: NM, TX, LA, MS, AL, FL, GA, SC. This BGL file has a half degree block missing due to bad data occuring in the USGS GeoTIFF file I downloaded. Tried fixing it...but to no avail. The missing block covers a rectangle with its bottom left corner at: Lat: 30.0000, Long: -83.5000, and its top right hand corner at: Lat: 31.0000, Long: -83.0000. See jpg image in folder.

USA South East USGS 10 metre mesh terrain - FSX only. This constitutes 10 metre terrain mesh for a section of the USA, The whole USA East mesh files will abutt the US West Coast 10m mesh already available, that was made by: Raimondo Taburet. Make sure you have your scenery terrain settings at about 5 metres in the FSX display dialogue for the mesh to show properly! Includes: NM, TX, LA, MS, AL, FL, GA, SC.

USA South East USGS 10 metre mesh terrain - FSX only. This constitutes 10 metre terrain mesh for a section of the USA, The whole USA East mesh files will abutt the US West Coast 10m mesh already available, that was made by: Raimondo Taburet. Make sure you have your scenery terrain settings at about 5 metres in the FSX display dialogue for the mesh to show properly! Includes: NM, TX, LA, MS, AL, FL, GA, SC.

USA South East USGS 10 metre mesh terrain - FSX only. This constitutes 10 metre terrain mesh for a section of the USA, The whole USA East mesh files will abutt the US West Coast 10m mesh already available, that was made by: Raimondo Taburet. Make sure you have your scenery terrain settings at about 5 metres in the FSX display dialogue for the mesh to show properly! Includes: NM, TX, LA, MS, AL, FL, GA, SC.

USA South East USGS 10 metre mesh terrain - FSX only. This constitutes 10 metre terrain mesh for a section of the USA, The whole USA East mesh files will abutt the US West Coast 10m mesh already available, that was made by: Raimondo Taburet. Make sure you have your scenery terrain settings at about 5 metres in the FSX display dialogue for the mesh to show properly! Includes: NM, TX, LA, MS, AL, FL, GA, SC.

FS2004 Viking DHC6-400 Twin Otter. The worldwide demand for refurbished Twin Otters is such that Viking Air have commenced manufacture of new aircraft in their plant in Calgary, Canada, using original de Havilland jigs and tools. The new manufacture -400 model is externally identical to the -300 but has a Honeywell "glass cockpit" avionics suite. We could not source freeware Honeywell gauges so we have used Garmin avionics in this model. The launch customer is Zimex Aviation of Switzerland and first delivery is expected in September 2009. Full package for FS2004 with five liveries, including authentic Zimex Aviation livery. By Jean-Pierre Brisard, Barry Blaisdell, Kevin Pardy, & Bob May - Premier Aircraft Design.

FSX Viking DHC6-400 Twin Otter. The worldwide demand for refurbished Twin Otters is such that Viking Air have commenced manufacture of new aircraft in their plant in Calgary, Canada, using original de Havilland jigs and tools. The new manufacture -400 model is externally identical to the -300 but has a Honeywell "glass cockpit" avionics suite. We could not source freeware Honeywell gauges so we have used Garmin avionics in this model. The launch customer is Zimex Aviation of Switzerland and first delivery is expected in September 2009. Full package for FSX/SP2 (DX9 graphics) with five liveries, including authentic Zimex Aviation livery. By Jean-Pierre Brisard, Barry Blaisdell, Kevin Pardy, & Bob May - Premier Aircraft Design.

USA South East USGS 10 metre mesh terrain - FSX only. This constitutes 10 metre terrain mesh for a section of the USA, The whole USA East mesh files will abutt the US West Coast 10m mesh already available, that was made by: Raimondo Taburet. Make sure you have your scenery terrain settings at about 5 metres in the FSX display dialogue for the mesh to show properly! Includes: NM, TX, LA, MS, AL, FL, GA, SC.