FSX/P3Dv4,V5 Cessna 185 Skywagon The Cessna 185 is a high-winged aircraft with non-retractable conventional landing gear and a tailwheel.The aircraft is basically a Cessna 180 with a strengthened fuselage.This is the C185E version with normal wingtips. Over 4,400 were built with production ceasing in 1985. Native FSX/P3Dv4,v5 by A.F.Scrub

"imp" means imperfect, as other mesh I have already processed is of areas that have very little vegetation cover - over the land, or has large urban areas. This "imp" mesh will include some slight discrepancies of altitude (in the case of forested areas - by a magnitude sometimes of +15 metres-depending on how tall the trees are, in the jungle or forest canopy) over urban areas, or areas with a lot of vegetation cover - due to the limitations of the ASTER satellites infra red scanning cameras, and the software used to process the DEM data. Areas where there is little vegetation cover, or non urban areas, the terrain should have truer values. But I feel this ASTER DEM data is so good - why let it all go to waste - especially flying over lovely Pacific islands? So you FSX users out there will have to take all this into account when using this mesh. Grateful thanks to ERSDAC, and NASA for making this data freely available to the public. ASTER GDEM Copyright (c) 2009 - 2011 Earth Remote Sensing Data Analysis Center (ERSDAC) All rights reserved. ASTER GDEM is a product of METI and NASA.

Dover Air Force Base package for FSX. Dover AFB is a United States Air Force base located two miles southeast of the city of Dover, Delaware. Dover AFB is home to the 436th Airlift Wing (436 AW) of the Air Mobility Command (AMC), known as the "Eagle Wing", and the AMC-gained 512th Airlift Wing (512 AW) of the Air Force Reserve Command (AFRC), referred to as the "Liberty Wing". It was the only base to solely operate the massive C-5 Galaxy, with two active flying squadrons (the 3rd Airlift Squadron, which now operates the C-17 Globemaster III, and 9th Airlift Squadron) and two Air Force Reserve flying squadrons (the 326th Airlift Squadron and the 709th Airlift Squadron). Just drop and fly. Created to enhance your Flight Sim experience by John B. Loney, Jr.

Mitsubishi A5M4 Claude with great working VC for FSX-Acceleration. Fixed to include VC gauges. All credits for the making of this great model are for Kazunori Ito, I only made it fly in FSX and put in some gun-effects for fun.

FS2004 Airbus A320-214 CFM Alitalia , registration I-BIKF. The Project Airbus A320 offers a wide range of features, many of which are XML controlled, such as pressurisation outflow valve, ground spoilers, pack outlest that open different amounts due to temperature, idle reversers, parallel bogies, dynamic jetwash, dropping surfaces, opening doors, custom lighting, dynamic shine, wing views, accurate landing gear. Model design by Andy Warden, flight dynamics by Peter Binamira, base textures by Demetris Themistocleous and Alessandro Savarese. Tested by Alexander Kvitta and Thomas Ruth. Repaint by Thomas Eisenbach. 3.7MB

FSX/P3D Airbus A350-900XWB Qatar package. Qatar Airways currently (2016) have 37 Airbus A350XWB on order. The Airbus A350 XWB is a family of long-range, twin-engine wide-body jet airliners from the European aircraft maker Airbus. The A350 is the first Airbus aircraft with both fuselage and wings made mainly from carbon fibre structure. The A350 is intended to replace the A340 and compete with Boeing's 787 and 777. Added the textures by Punit Soneji. Assembled using the pack base by FSPainter with enhanced Thomas Ruth VC with updates by Louis Quintero and some further edits by Chris Evans.

Stratojet Albatross Package. The Stratojet Albatross is a fictional amphibious multipurpose jet aircraft. This plane combines comfortable and fast business jet, amphibious plane, bush plane and cargo transport in one single aircraft! It is very easy to fly, can take off and land anywhere. The package features six paints. The VC displayed major issues like holes in the cockpit floor and half covered gauges. Original model by Eugene Heyart, panel update and new smoke effect by Michael Pook.

FS2004 Project Opensky - B737-700 Southwest Airlines "New Mexico ONE". Wingets/No Winglets. Features: : Fully animated control surfaces Fully independent suspension Front gear steering Trim Animation Opening Passenger Doors Dynamic flexing wings Animated tilting bogies Rolling wheels Animated thrust reversers Fully reflective textures ( each part has different degree of reflection based on material ) Accurate flight dynamics ( accurate FDE with full profiles for wheels, tires, struts, leading/trialing struts, engine types ... Tested by real pilots.) Accurate spoiler animation Detailed textures Full night lighting Visible landing lights from the thingypit Reflective thingypit windows Crash affects Transparent Nav light lenses. This aircraft is made by Project OpenSky Tested : Project-Opensky Members Painted : Dirk Kiefer. 8.2MB

GA Hangers SS Volume 2 Version 1 scenery objects. I decided to learn to use Google Sketchup, so you get some more hangers. :) These GA hangers are of the long narrow variety that I've not made before. Some are detailed, some are very plain for those situations where you need to place large numbers of hangers. This is a standard FS9 object library compatible with EZ-Scenery and Instant Scenery. I have also included thumbnails and other files to make it easier to use these objects with RWY12, Luis Sá's Sbuilder and Jon "Scruffyduck" Masterson's Airport Design Editor 9x. By Sidney Schwartz

Tenkuu Developers Studio - Boeing 737-MAX8 base package. Includes models for both FSX and FS2004. Boeing House Colors livery included. By the TDS team. No VC included in the FSX version.