Posky 747-400 Freighter in National Airlines lastest livery, this is the whole aircraft plus VC. Painted by Stephen Browning

FSX/FS2004 Spitfire Mk Vb and Mk VcTrop The basic Mk V was a Mk I with the Merlin 45 series engine. This engine delivered 1,440 hp (1,074 kW) at take-off, and incorporated a new single-speed single-stage supercharger design. Several Mk I and Mk II airframes were converted to Mk V standard by Supermarine and started equipping fighter units from early 1941. With the advent of the superb Focke Wulf Fw 190 in August 1941 the Spitfire was for the first time truly outclassed,hastening the development of the "interim" Mk IX. In an effort to counter this threat, especially at lower altitudes, the VB was the first production version of the Spitfire to use "clipped" wingtips as an option, reducing the wingspan to 32 ft 2 in (9.8 m).The clipped wings increased the roll rate and airspeed at lower altitudes. Tested in FS2004/FSX/FSXacceleration. GMAX model by A.F.Scrub

FS2004 Diamond HK36 Motor Glider TTD115 Super Dimona Day Flyer Reg_ID: N274JH out of Princeton MN, USA A complete package with panel, VC, Sound, HTML Check & Ref List. Made in FSDS 2.24 with complete animation. Features a dynamic VC, opening canopy etc. Design by Pavel Toman, Barry Blaisdell and Bob May - Premier Aircraft Design. 8.8MB

FS2004 A380 Virgin Atlantic Textures only. This is a repaint of Mike Stone's Airbus A380 (required here) Repaint by Andy Nott. 904K

FSX/Acceleration/FS2004 Amphibious Floatplane Bartini Beriev VVA-14 in two versions. This strange looking aircraft was a soviet prototype for an amphibious concept, planned for a VTOL version with 14 engines; therefore the name VVA-14. The first version was a konventional one with gear but no floats and made its first flight in September 1972. Later inflatable rubber floats were installed but the aircraft was not able to go airborne. Finally the inflatable floats were replaced with solid floats, the bow was streched and got two additional jet engines. The design gives you no answer if this monster is an aircraft, a hydroplane, a flying catamaran boat or an alien spaceship from starwars. The wreck can be visited at the Molino museum near Moscow. The second prototype went lost in a fire and the VTOL version, planned for anti submarine warfare, was never built. As FS-model you can fly both version of the first prototype with great handling on ground, in air and on water: One with animated inflatable rubber floats and the other with solid floats. The model has a VC with animated stick- and throttle arms. FSDS 3.5 model by Erwin Welker, panel configuration by Michael Pook and russian gauges by different authors. Special thanks to them!

FSX native Cessna 150 The Cessna 150 is a two-seat tricycle gear general aviation airplane that was designed for flight training, touring and personal use.The Cessna 150 is the fifth most produced civilian plane ever, with 23,839 aircraft produced. Special thanks to : -GMAX for the drawing program and Microsoft for their makmdls.mdk. -Tom Tiedman for some of the textures -Martyn Northall of Just flight. GMAX mdls by A.F.Scrub.

Boeing 747-400 Eva Air package with enhanced VC. Taiwan based Eva Airways operates 4 Boeing 747-400 aircraft out of it's fleet total of 67, to destinations worldwide. Project Opensky native FSX Boeing 747-400 assembled and upgraded for with the developed B747 VC (virtual 3d cockpit) from Alejandro Rojas Lucenda (Manual included). This is the Project Opensky FSX native Boeing 747-400 model, and includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility), opening nose section and more. Included CF engine sounds from BrandonG, with realistic jet whine to make your flight sound great. Thank you to Project Opensky team for their contributions to the worldwide community of flight simulation. Thank you to RyanC for the great textures. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Assembled and edited for FSX by Chris Evans.

SimLauncherX (or SLX for short) can be used as a launcher application for both FSX:ME, FSX:SE and Prepar3D (v1 and v2.5). Flights can be loaded before launching the simulator or when the simulator is already running. New flight files can be created by selecting one of the installed aircraft, selecting the start location (runway or parking position), selecting the type of weather and the time of day. You can also display and create flight plans and attach them to a flight as requested or active flight plan.

Inspired by the superior work of Michael Carr I have developed a small library of Ground Service Equipment. These objects are mostly painted in the standard olive drab you find at many military bases. As with all my work the emphasis is on Frame-Rates and not microscopic reality so squint a little and pretend. Some of these objects have been included in my earlier scenery releases (most notably Seymour Johnson AFB) and I now present the complete collection as a library for use with scenery object placement programs like EZ_ Scenery from Abacus. John Stinstrom

This update supplies the following: The startup exhaust smoke effect that was omitted by error in the original upload, and a new model file. This model file features a single polygon shadow model. This may help with performance on older hardware. See ReadMe for installation instructions.