CFS3 Swordfish Mission Pack (v1.0) This is a package of 6 missions for CFS3 which are a series of missions flown by the GC swordfish. The channel dash mission requires the installation of several 1% planes (need to be downloaded from another site!) C Burgess. 20K

BELL 205A-1 UH-1H Huey Evergreen Helicopters (Floats). Thanks to Jordan Moore for the excellent design work, Original version "belluh1h.zip" onclick="NewWindow(this.href,'name','730','400','yes');return false">. This Version of the Bell 205-A-1 (UH-1H Huey) includes a paint theme of Evergreen Helicopters (Floats), the panel which I have included is my own. This helicopter is fully animated and upgraded with the "Huey" sound package. I have upgraded the Nav. Lights in the correct position and added those that were missing and one rotating beacon on the bottom, the horizontal stabilizer, cyclic and rudder pedals, and landing light are animated, the tail rotor assy. has been moved to the pilots side. The lights are independantly operated from the switch's inside the cockpit on the collective and the landing light can also be operated by a switch or from "ctrl L". The helicopter has had a major overhaul so that additional parts (ie: ext speaker, cargo hook, steps, antenaes, pilot & co-pilot doors open) and various textures could be individually added and painted. The pilot and co-pilot doors open when the aircraft is shut down, then close when rotor rpm increases. The cargo doors open and close with the landing light switch or "ctrl L". Modifications and Repaint by: Lynn Rogers Instrument Panel by: Lynn Rogers. 5.1MB

FSX Piper PA28-201 Silver. This is a Repaint of Hauke Keitel's Piper PA28-201 For Flight Simulator X .. Aircraft is Painted in a Highly Reflective Finish this Effect achieved with the use of a Modified Alpha Channel.This Technique Created and Used by Rooks Design Graphics .. This is a Complete Aircraft.. Textures By Mark Rooks. 2.7MB

FS2002 Cessna Citation Mustang. An FSDS2 aircraft with moving parts, including working shock absorbers and landing lights on landing gear. Also includes a custom panel, custom gauges (including a custom PFD) and a dynamic virtual cockpit. By Chuck Dome. 1.4MB

FSX/P3Dv3,v4 North American F-86F Sabre The North American F-86F Sabre was the most capable western fighter of the early- to mid-1950s. This swept wing, single engine jet was the most important western aircraft of the Korean War and often tangled with Russian-made MiG-15s over the infamous 'MiG Alley'. It was a hard struggle not only for the Korean sky, but also between two excellent aircraft builders of the East and West. In addition to its primary role as an air-to-air fighter, the Sabre could also carry bombs and air-to-ground rockets to attack ground targets. FSX/P3Dv3/v4 mdl by A.F.Scrub

FSX/P3D (incl v4) Boeing 737-700 BBJ Boeing Business Jet Deer Jet package. Deer Jet is a Hong Kong based luxury transport company with a fleet of luxury jets and boats available for private hire. The Boeing BBJ is primarily a 737 commercial airframe with modifications to provide for private jet service. The BBJ1 is based on a 737-700 airframe, with elements from the 737-800. Package includes advanced 737-800 VC added. Including utility for ground services, Passenger bus, cargo, stairs, refuelling truck etc (find it under - Views - Instrument panel - Util) The wonderful Boeing 737-800 from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing 737 sounds included for that extra realism. I have added the great textures by James Clarke. VC added and aircraft.cfg edited to allow correct VC views, jetways, wheel levels and wing views. See VC docs to get the best out of the VC and FMC. Tested in P3D4 & will certainly also work in earlier P3D versions as well as FSX. Assembled by Chris Evans.

P3D V3 & 4 / FSX Boeing 747-8F Saudia Cargo package with enhanced VC. Saudia Cargo is the cargo division of Saudia, the national carrier of Saudi Arabia. Saudia Cargo are thoigt to have 2 Boeing 747-8i on order. Project Opensky native FSX Boeing 747-8F assembled and upgraded for FSX with the developed B747 VC (virtual 3d cockpit) from Alejandro Rojas Lucenda (Manual included). This is the Project Opensky FSX native Boeing 747-400 model, and includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility), opening nose section and more. Included CF engine sounds from BrandonG, with realistic jet whine to make your flight sound great. Thank you to Project Opensky for their contributions to the worldwide community of flight simulation. I have included the professional Saudia textures by Carlos Salas. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Assembled and edited for FSX and P3d v3 & 4 by Chris Evans.

CYYJ (2017), Version 7, is a major upgrade to CYYJ (2014). It portrays the Victoria (British Columbia, Canada) International Airport (CYYJ), aviation museum, Pat Bay floatplane base (CAP5) and Coast Guard station, and nearby industrial park as they appeared in early 2017 - as well as a host of static aircraft. It is fully compatible with Victoria+ (both FS2004 And FSX versions), Ultimate Terrain Canada/Alaska for FS2004 and Ultimate Terrain X - Canada for FSX, ORBX's FTX NA Blue and other FS9 road and shoreline upgrades for the area. CYYJ (2017) includes aircraft and traffic files for a realistic AI scenario other than scheduled airline operations. (Use BC Regional AI - also available from this file library - for scheduled traffic). Version 7 adds all the recent major new construction and apron expansion at CYYJ, and includes a greater level of detail in many areas.

Sainte-Anne-des-Monts is a city in the Gaspesie-Iles-de-la-Madeleine region of the province of Quebec in Canada. It is here where Gaston DuPellier started 'Sea Lion Air Service' back in 1948 with a war weary C-47. Many villages were covered by Gaston bringing much needed fuel, passengers, mail and supplies. Today Avelar, his grandson still flies to not very well known villages which are the main routes of this small but efficient Air Service.....Scenery and Adventure Flights in Quebec, Canada.

Curtiss P-40e v.2 for CFS2 P-40E-1 of 11th FS, 343rd FG Kiska , Aleutians 1942 G-max model, full animation, 2D-panel, 3D virtual cocpit, multi-res,"shiny" textures, custom drop tank by Krzysztof Malinowski. Flight Model by Jay McDaniel. 1.9MB