All Time Popular > Page 1911
FS2000
MAXVIEW Cessna 310R
(Category: FS2000 > Props)
9.77Mb (1840 downloads)
FS2000
MAXVIEW Cessna 310R.
The aircraft contains all of the expected moving parts. Nose
gear, rudder, flaps, gear and props. A few added extras are
the wheel blocks, tie downs and piton cover. They will disappear
when Engine 1 (One) is fired up. The ladder will retract as
well. The Panel As the aircraft is loaded the Main forward panel
view will load. This panel will have the engine start gauges,
radios, throttle and Autopilot. After starting you can either
slide it down, or press Shift-2 to remove it. I personally leave
it where it is and just press Shift-2. After doing this, the
Taxi-Cruise panel will be visible. The Engine gauges are to
the right so you have to look to your 2 o'clock position to
see them. All of the other "Out the Window" views are there
as well. Please don't comment on the curtains, I didn't pick
them out. The Sound The sound is a combination of Default Mooney
and Default Cessna combination. The Mooney is a near exact copy
of the Cessna 310. At idle the engines can't be heard, just
the biting of the props. If you don't want to use these sounds,
feel free to use any other great sound packages available on
the Internet. The Sound.cfg file has been modified to include
two engines. Cas Stephens. 10MB
Posted Aug 24, 2009 06:46 by archive
FS2004/2002
Boeing 747-400 Costa Virtual Airlines.
(Category: FS2004 > Civil Jets)
5.10Mb (1840 downloads)
FS2004/2002
Boeing 747-400 Costa Virtual Airlines.
Take a flight with this beatiful aircraft ! With this Hight
Quality textures. Repainted by : Victor Hugo & Gustavo Costa
! Model by Posky. 5.2MB
Posted Jun 23, 2008 14:30 by archive
FSX Aviatika MAI-890 Ultralight Engine Smoke Effect
(Category: FSX > Props)
0.19Mb (1840 downloads)
FSX Aviatika MAI-890 Engine Smoke Effect.
For the Rotax 912 ultralight engine on the
Tim Conrad freeware Aviatika MAI-890 ultralight
biplane for FSX, which you must have previously
installed. By Tom Tiedman
Required files:
required file
Posted Jun 24, 2010 00:12 by Tom Tiedman
'Pilotable' Type VII
(Category: CFS2 > Misc)
0.47Mb (1840 downloads)
This is the pilotable version of my Type VII U Boat. The Type VII was the most numerous U Boat of WWII and was in
production from 1938 through the end of the war. The Panel, DP, AIR and CFG files are by PSULLYKEYS. This version will is armed with an 88mm deck gun and 20mm AAA, as well as the MK10 Torpedo. Guns Only or Torpedoes are selectable payloads. The trigger fires the 88mm forward, and the cannon key fires both the 88mm and 20mm
broadside in both directions. The torpedo loadout is 12.
The vessel submerges/surfaces using the EXITS/Canopy command. When submerged only her periscope is visible above the surface unless you have aircraft shadows enabled, in which case the shadow will be visible from above.
The VII Boat is equipped with a full panel. She has a compass, nav panel (must be in GPS mode to have knot meter
function), rudder trim and a full GPS gauge.
The VII Boat can be launched in missions from any water runway, but is most easily launched from one of my sub
tenders (most notably the Invisible Tender), all of which are available here at SimV.
Posted Jun 23, 2009 22:58 by Tom Sanford
FSX USA 10 metre mesh, Batch 5 Part 7 of 8
(Category: FSX > Terrain Mesh)
57.50Mb (1840 downloads)
USA EAST USGS 10 metre mesh terrain - FSX only.
This constitutes 10 metre terrain mesh for a section of the USA, The whole USA East mesh files will abutt the US West Coast 10m mesh already available, that was made by: Raimondo Taburet. Make sure you have your scenery terrain settings at about 5 metres in the FSX display dialogue for the mesh to show properly!
Includes: CO, NE, KS, IA, MO, IL, IN, KY.
Posted May 23, 2009 07:49 by Wayne Evans
FSX USA 10 metre mesh, Batch 5 Part 5 of 8
(Category: FSX > Terrain Mesh)
53.55Mb (1840 downloads)
USA EAST USGS 10 metre mesh terrain - FSX only.
This constitutes 10 metre terrain mesh for a section of the USA, The whole USA East mesh files will abutt the US West Coast 10m mesh already available, that was made by: Raimondo Taburet. Make sure you have your scenery terrain settings at about 5 metres in the FSX display dialogue for the mesh to show properly!
Includes: CO, NE, KS, IA, MO, IL, IN, KY.
Posted May 23, 2009 06:32 by Wayne Evans
Bell 206B JetRanger
(Category: FS2004 > Helicopters)
111.16Mb (1839 downloads)
This is a scratch built revision of the default Bell 206B III JetRanger using Gmax. Features highly detailed exterior and virtual cockpit, maximum moving parts, interactive VC, dynamic shine, and
reflective textures. Now features all new XML gauges and sound system. By Eagle Rotorcraft Simulations
Posted May 21, 2020 13:29 by George Arana
FS2004 ATR72 Series Package
(Category: FS2004 > Props)
85.07Mb (1839 downloads)
FS2004 ATR72 Series
Full pack ATR72 Series including Models with virtual cockpit
Turbo prop Sound, Gauges functional, user manual, 5 models Series
-200 -210 -210F(cargo) -500 y -600, ground service and 37 repaints for models.
Development and donated as freeware By VIRTUALCOL FS SOFTWARE
Posted Apr 1, 2019 09:44 by virtualcol
A320 Sound Pack (CFM) V1.2
(Category: FS Sounds > Flight Simulator Sounds)
147.20Mb (1839 downloads)
CFM56 Sounds for the Airbus A320 CFM engines .
Posted Dec 15, 2017 18:00 by Kairi Akai
Kalitta Charters Boeing 727 Flyable Package.
(Category: FSX > Civil Jets)
19.52Mb (1839 downloads)
This is a Pilotable version of the AI Aardvark Boeing 727 for Kalitta Charters II and the HE Sutton Horse transport. Included are the HJG 727 panel and sounds, texture thumbnails included. 2D panel only.
Posted Jan 24, 2016 22:51 by Michael E. Roberts

