FS2004/2002 SGA MD-83 West Caribean Airways Columbia, HK4305X aircraft,model,panel,sound,textures. repaint by:JULIO MUÑOZ RAMIREZ The DC-9-81 (MD83) is a development of the earlier DC-9 series with new avionics and aerodynamics. HK4305X, is operated by West Caribbean Airways Operating in the new routes :Medellin _Sn Andrés,Medellin_Cali,Medellin _B/QUILLA, Sn Andrés_Sn josé(Costa Rica), Sn Andrés_Panama ,Medellin_Bogotá. Repaint:Julio Muñoz Ramirez Model by Erick Cantu / SGA Textures by Chris Trott. 1.7MB

First appearing in 1947, the AN-2's was first dismissed as obsolete, due to it's biplane layout and homely looks. But the "Annushka" would prove the naysayers wrong.... and how! The biplane layout proved itself, and there wasn't much the AN-2 couldn't do, whether as a passenger, cargo, parachuting, crop spraying, or spec ops plane. Over 20,000 were produced, mostly in Poland. Not bad for an "obolete" design, Model by Tim Conrad, Texture by Gustavo La Cruz

FSX Gauges: FW190 Cannon Effect gauge. This freeware package contains visible/audible machinegun/cannon effects plus control gauge, as addon for the Classics Hangar FW190 for FSX (payware). The effects are activated either by mouseclicking the gun switch in the VC, or by a key / joystickbutton that generates repetitive FSX "CarbHeat On/Off" commands. It also uses/controls details specific for this FW190 package, like Nose/Wingroot Armswitches, ammo counters and wingroot machinegun/cannon model-dependancy. Includes detailled installation instructions; see README This file includes the update. By Rob Barendregt

The Fokker FVII was, in its various versions, the most successful European airliner of the decade between 1925 and 1935, and had also considerable success in the USA. The three-engined Fokker FVIIa/3m appeared soon after the first Fokker trimotor was, in fact, the second FVIIa built. The FVIIa/3m was mainly sold in America after winning the Ford Reliability Tour of 1925. The Fokker F.XII trimotor was much larger than the well-known FVIIb/3m. KLM had 8, and the associated company KNILM 2, two F.XII's. This mega pack features three different Fokker models and six very detailed liveries deigned by Jens B, Kristensen. However, all the panels have been remodeled and enhanced and the FDE has been modified to function properly in FSX Acceleration. Thanks to Jens B. Kristensen for his original models, to Mauele Villa and Maarten Brouwer for some of the repaints and to Erwin Welker for the added camera views. New panel, FDE modifications as well as smoke effect by Michael Pook.

FS2004- Bombardier/Canadair CL415 Hellenic Air Force. FS2004 version of the Canadian built fire fighting amphibious CL215. This version represents a fire fighter aircraft. No 3d Virtual Cockpit. Visual Model by Massimo Taccoli. Original Panel work from Rolf "UWE" Hockmuth modified by me with added gauges from Andrea Cini. Other textures by Anthony Konstantinidis.

The McDonnell F3H Demon was a Us Navy carrier-based jet fighter aircraft, which served from 1956 until 1964. The package features a completely new- designed VC and 2D panel with FSX compatible Gauges. Original model by James Smith and Bruce Baker (Flightsimdesign), new panel configuration by Michael Pook.

FSX PROGRAMMABLE RIPPLE BOMB RELEASE SWITCH - For Droppable Objects. ****" Enables multiple bombs to be dropped at a SINGLE click ".**** This version is for Helicopters only, DO NOT use on Fixed wing aircraft. Assign TAILHOOK to a Controller button to maximise useage. (1) Set Number of Missiles/Bombs required, Qty "No" 01 to 99. (2) Set Time Interval required between each bomb ,"TI" 0.00 to 9.99 seconds. (3) then a SINGLE Click of release "Pickle" button sets off the Ripple drop that you have set .Eg; "No 12 - TI 0.01" = concentrated drop zone. While "No 24 - TI 0.50" = strung out drop pattern, it will take 12 seconds for all 24 bombs to drop from your Helicopter.All from a Single click. MUST have the freeware "Weapons Package" by Chris Sykes installed. Has Safe - Armed lights ,Ideal for any military Helicopter Gunship , the Weapons used is totally up to individual preferences , generally it would be missiles like the Maverick or Hellfire , if you chose to drop multiple bombs , then make sure that you have a good forward speed to create separation between the ground impacts.Works for both Bombs and Missiles.Distance interval chart included.Copy Allowed PDF with ID, image and dimensions for all weapons, provided to facilitate rapid copy/paste for weapon changes is included. Pave Tack all aspect/directions in cockpit viewer instrument that enables observation of bombs dropping and exploding from within the cockpit included. This package is "Public Domain" can be used or modified, or included in both free and payware projects without any limitations. By Karol Chlebowski.

FSX 38m (Lod10) Terrain Mesh files of the province of Quebec (N45°-N52°, W56°-W80°). The 23 m (or 76m) Canadian Digital Elevation Data for Quebec. http://www.geobase.ca The 90-m digital elevation model (Shuttle Radar Topography Mission - SRTM-3) ftp://edcsgs9.cr.usgs.gov/ pub/data/srtm/North_America/3arcsec/. By Gilles Gauthier. Part 1 46MB Part 2 45MB Part 3 40MB Part 4 44MB Part 5 40MB FSX Quebec Roads. Addition of Roads for the province of Quebec, Canada. For best scenery, use with lakes, shorelines and rivers of the province of Quebec, Canada. Gilles Gauthier. 7.8MB

FSX/P3D McDonnell Douglas/Boeing MD-11 base pack for FSX and P3D AI traffic.(Note:This model pack cannot be used in FS9). Model,FDE and textures by Mitsushi Yutaka(FSpainter)

Generic Fighter panel for FS2002. This panel is designed for advanced fighter/interceptors. I have removed the original panel's AIMap gauge and included some more advanced looking gauges. There is also a pushback gauge included, which was designed by Roger Blanc. This is great for fast, advanced fighters or other high-speed aircraft. Modified by Travis FitzPatrick. Original panel designed by Eric Marciano. 880K