FS2000 Harley Davidson Shovelhead Custom Based on my own 1971 shovelhead features real Shovelhead wav sound file animated forks, night lighting made with FSDS inspired by John Dow (Harley01.zip panel) to his request for a harley. (sorry Ididn't use your panel went with a virtual cockpit so u=you can see the forks move). 1.5MB

FS2004, Acapulco International Airport, Mexico - MMAA This scenery depicts the Acapulco International Airport in it's entirety. It is a smaller airport, but is able to handle the largest jetliners. There are no jetways at this airport, and incoming international flights are met by buses which carry passengers to the terminal. This airport also has a large general use population due to it's jet set locale. It uses pink in many areas most likely due to the very popular Las Brisas Hotel which originated the pink and white color scheme it uses in this city, even in their transport Jeeps. An afcad is also included which contains cross pattern runways which are used here, and was completed with the help of Ray Smith. By: Bill Melichar. 4.4MB See below ..

This is scenery for the Steven F. Udvar-Hazy Center at Washington-Dulles Airport. This adds the Boeing Hanger and Space Hanger. This scenery also fills the hangers with aircraft such as the Concorde, 747, and SR-71. I tried the make it as real as possible but most of the historical aircraft are not made in FSX. Some the the aircraft were switched such as the 707 for the 747. In all there are over 60 aircraft, some are hanging from the roof as well. To tour the center start at the Washington-Dulles Airport at runway 1R and turn around. Use slew mode to tour the buildings. FOR FSX ACCELERATION! *Will work without acceleration but with less aircraft. Made by Daniel Kemmer.

This is Photoreal scenery for Yellowstone National Park in the United States. The package is 3 Gb compressed due to the high detail and area coverage. It covers 4340 square miles or 11240.5 square kilometers. Zip preview for more screenshots.

Dornier Do-335 Escuadriila updated for FSX. This is the Simtech Do-335 from FS2004 updated to work in FSX. The Do-335 has an unusual inline tandem engine arrangement and was designed to be a bomber/intercepter with a top speed of 474 mph. Orignal by Tom Wood. Updated by Danny Garnier.

Grumman F7F-3N Tigercat include the radar version for CFS2 only This aircraft created with FSFD ,features fully moving parts night lightning effects, virtualcockpit, panel and sound files. Original construction by Frans Vranken. Textures and FDE, DP files by Brunno Duffort This aircraft is released as copyrighted freeware. 24 November 2000 Thanks for downloading this aircraft! Any feed back would be appreciated.... 5MB

FS2004 Sopwith Tabloid 3 versions (Prototype, Production and RNAS) made in Gmax with reflective textures. By Craig Richardson. 7.8MB

Designed to Air Ministry Specification 2/44 the Brabazon was, at the time of it's construction, one of the largest aircraft ever built, being sized roughly between the much later Airbus A300 and Boeing 767 airliners. Despite its vast size, the Brabazon was designed to carry a total of only 100 passengers, each one being allocated their own spacious area about the size of the entire interior of a small car. Designed to pre-war airline standards, the 8 Centarus-powered Brabazon was probably at the practical limit for a piston prop-liner, and was deemed un-economic in the post-war climate, with no orders forthcoming. Often considered a failure, the Type 167 more than met it's design specs, was a pleasant, well mannered machine that pioneered fully powered flight controls, gust alleviation systems, electric engine controls, high-pressure hydraulics and advanced construction techniques. 60% of the program cost went into capital improvements at Filton and elsewhere that served the British industry well in the jet-age. The final verdict must be that the aircraft was a completely successful prototype showing what to do, and what not to do. FSX native update of the JBK Brabazon, which features a full interior, a very nice front office you could park a Rolls-Royce in, tight modelling, smooth flight model, a great autopilot and slippery frame rates. A few extra are skins provided. Model by Jens B. Kristensen, with a huge B-Z for allowing me to pillage his superb library.

FSX/P3D (Incl. v4) McDonnell Douglas DC-10-30 Canadian Airlines package. Canadian Airlines International was an airline based in Calgary and during its operations between 1987 and 2001, was Canada's 2nd largest airline. Canadian operated 9 DC-10-30 to destinations worldwide. The DC-10-30 has range for medium- to long-haul flights, capable of carrying a maximum of 380 passengers on flights up to 6,600 miles. Includes custom VC. Model and VC by Thomas Ruth. Includes comprehensive VC with working wipers. I added the great textures by Paul Craig, wing views, jetways and levels. Added FMC by Garret Smith. Custom packaged for P3D (all versions) and FSX by Chris Evans

FSX TDS Boeing 737-800 Air Transat Package with enhanced VC Based in Montreal, Canada, Air Transat curently (2015) operate 5 Boeing 737-800 aircraft. Model by TDS/ Tenkuu Developers Studio with advanced 737-800 VC added. Includes utility for ground services, Passenger bus, cargo, stairs, refuelling truck etc (find it under - Views - Instrument panel - Util) The wonderful Boeing 737-800 from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing 737 sounds included for that extra realism. I have used the beautiful textures by Stefan Bree. Model is not modified in any way. VC added and aircraft.cfg edited to allow correct VC views. TDS wonderful native FSX Boeing 737-800 model. See VC docs to get the best out of the VC and FMC. Assembled and prepared for FSX by Chris Evans.