Fix the the repaint of the payware SMS A320 Frontier Airlines N223FR textures. Fixes tail fin texture.

FS98 Glider Winch Launch Simulation. Allows simulated glider launch. File size 7396

Fictional repaints of British Airways current livery for SkySpirit2012 Boeing 747-8I. Repainted by Toby Boult. Texture only

This file set basically is a gauge set that allows P3D users to have the old Shift+D ability to drop objects like FSX had. The Mission "Flour Power" was the most popular mission to use the droppable object mechanic in FSX and so it was decompiled from its fsx .SPB file and converted to P3D xml file format. An unedited version of the original FSX mission decompiled into xml format is included in the mission folder for any one to use as a comparison to see what was done to the final version to get the FSX mission working in P3D. P3d already had a sim event for dropping objects, the gauge file just reads the event, and spawns the appropriate object set forth in the appropriate ini file. This event is default Shift+D in controls settings of P3D but can be changed to whatever key combo or buttons or controller buttons the user desires. It can be used in missions like flour power for example or for dropping flares in fighter jets. An example for both is included. Tested in P3Dv4 and P3Dv5. Should work in v6 if configured correctly. This is a fully updated package that addressed some minor bugs.

Grumman F4F-4 Wildcat VMF-224, Guadalcanal September, 1942 The Wildcat was the only effective fighter available to the United States Navy and Marine Corps in the Pacific from 1941 to 1943. While the Wildcat was still outperformed by the faster, more maneuverable, and longer ranged Mitsubishi A6M Zero, the F4F's ruggedness combined with effective US pilot's tactics made it more successful in combat. The first operational version, the F4F-3 had a fixed wing which limited the number a fleet aircraft carrier could operate to 18. Grumman had proposed incorporating a folding wing to the Wildcat in 1940 and the Navy had awarded a contract for the F4F-4 in 1941. The folding wings would allow the fleet carriers to operate 27 Wildcats. The Battle of the Coral Sea had proved the need for more fighters for CAP and escort, and the Navy rushed to replace the fixed wing F4F-3 with the new F4F-4 before the next inevitable carrier battle which turned out to be Midway. Navy and Marine pilots weren't thrilled with the F4F-4 as it was heavier, less maneuverable, and had added 2 more machine guns which reduced the ammunition to each and reduced the firing time. But it was what they had. They made the most of it that they could, and held the line through 1943. Credits Captain Kurt: Aircraft model, drop tank, bomb rack, bomb, VC, paint textures, aircraft flight files, and .dp Shessi: Pilot figure Morton: 2D F4F instrument panel modified to an F4F-3 version Kelticheart: Prop blurred texture Microsoft: Gauges and .air file

Messerschmitt Bf 109E-4/B trop by Design Team Daedalus Unit: 2.(J)/LG2 Tudora-Botosani, Romania June 1941 Pilot: Ltn. Hans Guse KIA The E-3 was replaced by the E-4 (with many airframes being upgraded to E-4 standards starting at the beginning of the Battle of Britain), which was different in some small details, most notably by using the modified 20 mm MG-FF/M wing cannon and having improved head armor for the pilot. With the MG FF/M, it was possible to fire a new and improved type of explosive shell, called Minengeschoß (or 'mine-shell'), which was made using drawn steel (the same way brass cartridges are made) instead of being cast as was the usual practice. This resulted in a shell with a thin but strong wall, which had a larger cavity in which to pack a much larger explosive charge than was otherwise possible. The new shell required modifications to the MG FF's mechanism due to the different recoil characteristics, hence the MG FF/M designation. The cockpit canopy was also revised to an easier-to-produce, "squared-off" design, which also helped improve the pilot's field of view. This canopy, which was also retrofitted to many E-1s and E-3s, was largely unchanged until the introduction of a welded, heavy-framed canopy on the G series in the autumn of 1942. The E-4 would be the basis for all further Bf 109E developments. Some E-4 and later models received a further improved 1,175 PS (1,159 hp, 864 kW) DB601N high-altitude engine; known as the E-4/N; owing to priority being given to equipping Bf 110s with this engine, one fighter gruppe was converted to this version, starting in July 1940.[21] The E-4 was also available as a fighter-bomber with equipment very similar to the previous E-1/B. It was known as E-4/B (DB 601Aa engine) and E-4/BN (DB 601N engine). A total of 561 of all E-4 versions were built,[13] including 496 E-4s built as such: 250 E-4, 211 E-4/B, 15 E-4/N and 20 E-4/BN. There were many small differences between individual E-4s because the E-4 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor, armored windscreen, tropical sand filters, E-7 type pointed spinners, etc. So each model we have created has its own unique features. This aircraft was an E-4/B modified with a tropical sand filter, and a flat plate pilot head armor. Still carrying a sand and mottle camouflage from the Greek campaign, it took part in the opening stage of Operation Barbarossa until it was shot down by a Soviet Polikarpov I-16 on July 10, 1941 Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf109F-2/Trop by Design Team Daedalus Unit: 1./JG27 El-Adem, Libya November, 1941 Pilot: Fw. Albert Espenlaub There is no "standard" Bf 109F-2, as the production run underwent many small modifications and there were field implemented updates along the way. So each model we have created has it's own unique features. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible framerates. Mav also developed the idea for the 2d panel to be offset for the Revi gunsight to match the CFS2 reticle. The engine sound package is by Lawdog2360

What happens when you graft a PT-6 turboprop engine into a Storch? It's quite different. GPLv2 EULA

Fictional repaints of British Airways current livery for Thomas Ruth Airbus A310-300. Repainted by Toby Boult. Textures only. Requires a full package Thomas Ruth A310-300 version.

Fictional (Hybrid Livery) repaints of British Airways/bmi British Midland for Thomas Ruth Airbus A330-200. Repainted by Toby Boult. Textures only. Requires a full Thomas Ruth A330-200 package.