FS2002/FS2004 Mothra Science Fiction Animation Plastic Model Series No.30. This is based on the Japanese movie "Mothra". This is new version "mothra" that is possible a highspeed flight(after 1996). By Kazunori Ito. 1MB

FS2004 F14 VF31-"Tomcatters" textures only repaint for the original F14 Tomcat by Dino Cattaneo here. This scheme represents an F14 D serving on board the USS Abraham Lincoln (CVN-72) in 2002. Repaint by David Ulke. 827K

FS2004 Airbus A320-200 Taca registration N493TA. The Project Airbus A320 offers a wide range of features, many of which are XML controlled, such as pressurisation outflow valve, ground spoilers, pack outlest that open different amounts due to temperature, idle reversers, parallel bogies, dynamic jetwash, dropping surfaces, opening doors, custom lighting, dynamic shine, wing views, accurate landing gear. Model design by Andy Warden, flight dynamics by Peter Binamira, base textures by Demetris Themistocleous and Alessandro Savarese. Tested by Alexander Kvitta and Thomas Ruth. Repaint by Luis Jiminez. 10.4MB

Zeppelin NT Spirit of Adventure textures only. The Zeppelin NT (new technology) is a class of airships being manufactured since the 1990s by the German company Zeppelin Luftschifftechnik GmbH (ZLT) in Friedrichshafen. The Zeppelin NT is classified as a semi-rigid airship. Hand-drawn textures only, the Zeppelin NT model by Thomas Roehl is required. Repaint by Ingo Schwan.

AFS Demo: Eurofighter is a single-seat, twin-engine, agile combat aircraft which will be used in the air-to-air, air-to-ground and tactical reconnaissance roles. The design of Eurofighter Typhoon is optimised for air dominance performance with high instantaneous and sustained turn rates, and specific excess power. Special emphasis has been placed on low wing loading, high thrust to weight ratio, excellent all round vision and carefree handling. The use of Stealth technology is incorporated throughout the aircraft's basic design. This model has a new panel with new gauges ,a new high textures virtual cockpit of authentic Eurofighter - EADS support and new original sound ( Demoversion with banners ) Models, panel, sound, textures, gauges and animations by www.afs-design.de - Author: A.Meyer.

This is a high definition repaint pack for the FSN wheeled version of the AT-802. The AT-802 SEAT or Single Engine Air Tankers have been used widely across the world. Mainly in North America and Australia. The AT-802 is capable of operating on dirt strips and remote refill locations due to it's small size and ability to work from rough strips. This capability is widely used in Australia. The AT-802 is used widely in the US as a contracted initial attack aircraft for the USFS. But it is largly overshadowed by the large contracted air tankers the USFS uses. It's 2 competitors in North America are mainly the the Bombardier/Viking CL-415/215T Super Scooper and the Grumman/Marsh S-2F3AT Turbo Tracker flown by Cal Fire. The S-2 and CL-415s both carry more than 1,000 gallons. Making the AT-802's 800 gallon capacity the smallest of the category. It is also slower than it's twin engine competitors. Still a viable platform, used in pairs in tandem to add to the effectiveness of drops similar to the use of the CL-415, the 802s can also be used as lead / air attack platforms. More powerful versions of the AT-802 variants are currently being flight tested. The new derivative, the AT-1002 is larger and more powerful 802 was first flight tested in late 2013. It is still in development, but will be capable of carrying 1,000 gallons of retardant/water and carry nearly twice the fuel of the 802s currently. Making the 1002 closer in performance to the other aircraft in it's category. This repaint pack represents 8 liveries for several operators in the United States, Canada, and Australia. Repaints by Nicholas Mitchell.

The Consolidated C-87 Liberator Express was a transport derivative of the B-24 Liberator heavy bomber built during World War II for the United States Army Air Forces. A total of 287 C-87s were built alongside the B-24 at the Consolidated Aircraft plant in Fort Worth, Texas. This is an FSX update for the FS2002/2004 Alphasim model and now features a new enhanced virtual cockpit with all new gauges compatible for FSX. In addition, the textures had to be partly modified to be recognized by FSX, some parts of them were not visible. The 2D panel features animated yoke and throttle panel. Smoke effect has been added as well. The package includes five liveries by different authors. Thanks to Phil Perrott for the original model, to Jim Nelson and Jaap de Baare for their previous FS2004 updates and additional Brit Liveries as well as to Glenn Duncan for the Corsair texture, which had to be modified to conform to this vc model. Panel and other updates for FSX by Michael Pook.

FSX FUJI T-7 trainer In the 1990s the Defense Agency planned to procure primary training aircraft for the Air Self-Defense Force. The newly planned aircraft model was to replace the T-3 primary trainer. In 1998, the T-7, developed by Fuji Heavy Industries Ltd. (FHI), was adopted. The first of 67 Fuji T-7 primary trainers, powered by the Model 250-B17F, was delivered to the Japanese Air Self-Defense Force in 2002. The Fuji T-7 is used for basic flight training by the Air Training Command and the Air Development and Test Command of the JASDF. Upgrade to FSX, FSX Acceleration by A.F.Scrub.

FSX/FS2004 Fix for my previous upload (ERJ135ER_Private_N637HJ.zip) Embraer ERJ135ER (Posky) with VC Private N637HJ. My mistake, I forgot to edit the "aircraft.cfg". To fix the problem of the aircraft not showing up in your menu, simply delete your entire "aircraft.cfg" file and replace it with this one. Sorry for the inconvenience. Tom Tiedman

FS2004 Do-It-Yourself Jetways Scenery Objects. This is a collection of jetway parts that you can use to make complex jetways of almost any configuration. It is best used with either EZ-Scenery or Instant Scenery since these programs will let you see the objects being positioned in FS2004 in real time. This library can be used with Rwy12 (if you create the necessary additional Rwy12 files), ADE9X, and other programs that use standard FS2004 object libraries, but it is not guaranteed you won't tear your hair out in frustration trying to precisely align the parts. By Sidney Schwartz.