The C.202 Folgore was a World War II fighter aircraft built by Macchi Aeronautica and operated by the Regia Aeronautica (Royal Italian Air Force). Considered one of the most beautiful fighters to fly with wartime Axis forces, the C.202 was a development of the earlier C.200 Saetta, with a more powerful German Daimler-Benz DB 601 engine and with an extremely streamlined fuselage. Undoubtedly the best wartime fighter to serve in large numbers with the Regia Aeronautica,the Folgore operated on all fronts in which Italy was involved. The '202 went into service with the Regia Aeronautica in July 1941 and immediately proved to be an effective and deadly dogfighter. VC only. GMax Models and Skins by Manuele Villa & Italianwings, Flight dynamics by Manuele Villa & Kikko Zanaboni, It also works (Tested) subject to some limitations within in FSX. By Manuele Villa/MVG3D, December 2011.

FS2004/2002 Messerschmitt "Libelle" . A radical proposal for a Miniaturjäger (Miniature Fighter) this design looked much like a flying egg. Powered by a single Heinkel HeS 011 turbojet the lightweight aircraft would have been faster and more manouverable than most of it contemporaries. Model features full animations, exhaust effects and comes in Luftwaffe colours. By Mark Walsh. 2.3MB

This is Tim Conrad's T-33 Updated For Flight Simulator X. Design work for the Lockheed P-80 began in 1943 with the first flight on 8 January 1944. Following on the Bell P-59, the P-80 became the first jet fighter to enter full squadron service in the United States Army Air Forces. As more advanced jets entered service, the F-80 took on another role - training jet pilots. The two-place T-33 jet was designed for training pilots to fly jets. This Aircraft belongs to the United States Air Force. This Aircraft has a new 2D and 3D fully functioning cockpits and new Effects. Textures and Updates by Mark " Fireball " Rooks of RDG Aircraft. Package Includes Pictures of the original TR-612 Aircraft Currently located In South Ga.

Additional views ( defined by camera definitions in the aircraft.cfg file ) for the beautiful Sikorsky CH-53 and Sikorsky MH-53 Pave Low by Rory kelly ( built for FS 2004 ) and adapted for FSX by Danny Garnier. 9 cameras pointing at the aircraft and a total of 3 views in the 3D cockpit. See Read me.txt file for very easy installation procedures. One camera definitions.txt file for all models And finally two more files - Available.pdf and Top 20.pdf for informations about my "camera definitions" packages. Requires the CH53/Pavelow package

FS2004/02 IAI Arava 201 Fuerza Aérea Colombiana Package. The arava is a light weight cargo plane, it was designed to be a multifunctional aircraft. The Colombian Air Force bought 3 of they in the 80's and since then they are flying through all the country. FSDS Model, totally animated, with vc and functional cargo door (Shift E + 2). Model, Texture and Panel: Eduardo Fadul. Panel helper: Alejandro Villa Cabal. 4.1MB

This is an FSX update of the legendary FS2002/2004 AlphasimAvro Vulcan B2 with VC. However, the VC contained gauges but, strangely, they were not visible. Cirrus N210MS (real name unknown) has posted a native FSX conversion at SOH, which made it possible to incorporate the interior and VC from another native FSX model. So I've added the interior of the Alphasim Victor bomber to the Vulcan, which doesn't match the original panels in every respect but resembles them to some extent with original Vulcan gauges added. Also, new smoke and burner effects have been added, which are automatically activated by opening the throttle. This package includes the two default liveries (Camo and White) and is adressed particularly to those who would like to have a functioning VC with this beautiful Vulcan model. My idea was to bring it back to life for FSX users who like flying with VC view. Original model by Alphasim, credits go to the unknown designer Cirrus for his FSX conversion, to Philippe Wallaert for his phantastic Vulcan gauges and to FS Soundstudio (Darren Law) for the great original whine sound. May work in P3D v3 but will not work in V4. VC and 2D panels as well as all new effect configurations by Michael Pook.

The Fiat C.R.42 was a single-seat fighter biplane which served primarily in Italy's Regia Aeronautica just before and during World War II. The aircraft was produced by the Turin firm, and also served, in smaller numbers, with the air forces of Belgium, Sweden and Hungary. With more than 1,800 built, it was the most widely produced Italian aircraft to take part in World War II. The Fiat C.R.42 was the last of the Fiat biplane fighters to see combat and represented the epitome of the type. RAF Intelligence praised its exceptional manoeuvrability, further noting that the plane was immensely strong.The Fiat C.R.42 made its combat debut with the Belgian Air Force, over Belgium on 10th May 1940. Complete aircraft, features the usual moving parts, such as all flight controls. Many different liveries (Regia Aeronautica/Belgian Air Force/Swedish Air Force/Hungarian Air Force). VC only. GMax Models and Skins by Manuele Villa & Italianwings, Flight dynamics, Handling notes and Tutorials by FSAviator, It also works (Tested) subject to some limitations within in FSX (NOT Acceleration). By Manuele Villa/MVG3D, January 2011.

FSX/FS2004 HS.780 Andover C1 RAF 46 Sqn Dark Cammo Thorney Island Textures only. Required Rick Piper's HS 748 Andover (here). Textures by Neil Angus. 3.8MB

Oceania - Asia SRTM Terrain Mesh for FSX Part 5 Covers Australia, New Zealand (including Auckland Islands & Macquarie Island), PNG/Irian Jaya, Indonesia, Malaysia, Philippines, Taiwan, Japan, Korea, Micronesia, Solomon Islands, New Caledonia, Vanuatu, Fiji Islands and all other Pacific Islands (except The Hawaiian Islands). This Mesh is PROCESSED FROM SRTM DATA VERSIONS 3 and 4.1 and Complied using Global Mapper & FSX SDK. Thomas Trewin

Embraer ERJ-170 Japan Airlines Textures only, registration JA736X. A fictional repaint showing the JAL livery for this aircraft, entering service in 2009 with this airline. Textures only for the Dreamwings Embraer 170 series release, (Dreamwings_erj170_base.zip), model by Carl Selin, textures by Tommy Hansson, FDE by John Cillis and sounds by Albert Ramic. Repaint by Juan Ernesto Oropeza.