Mar 23, 2019 |
All Files > Page 7
 
... 5 6 7 8 9 10 ...
 
FS2004/FSX Flight Analyzer, Logbook Utility V4.09
FS2004/FSX Flight Analyzer, Logbook Utility V4.09
3.35Mb (159 downloads)
FS2004/FSX Flight Analyzer Utility V4.09 Flight Data Recorder - Logbook. NOW WITH STATISTICS TOP 5 AIRPORTS, CITIES AND COUNTRIES. Very easy to use, just make a flight plan in the simulator or in this utility. What this program do: - quickly change the settings of FSX/Fs2004, such as time, date, fuel, weight, traffic etc. - start a failure sytem, such as gear, flaps, engine, etc. - freeze the time, so you can fly in a for everlasting sunset. - runway detecting system to see wich runways are in use. - flight analyzing/data recording from departure to parking at the gate. - When flight analysis is finished you can print a report, the report is automaticly saved as pdf File. - graphical landingchart. - record all your flights - quickly look to your FSX display settings (only FSX) and change them even before the flight simulator is running. - After a flight is finished FsQC saves your flight automaticly as 'FsQC last Flight', so you can continue the next day or hour. Flight analysis start recording at the moment when you begin taxiing. It gives you huge information such as: - takeoff- and landing-weight. - takeoff- and landing-roll in m. and ft. - separate fuel consumption in taxi, climb, cruise and descent. - maximum banking in flight. - which speed you using the flaps and gear. - when autopilot on or off. - vertical speed on touchdown. - reverser set after landing. - wich speed you cancel reverser. - bouncing at landing. - graphical landingchart. - and lots of more. You can better look the example of the pdf document located in the 'Flight Reports' folder. Logbook records: - fuel consumption. - payload. - distance. - number of different airports. - flight hours. - landings. - flaps. - speed. - and lots of more. - quickly show touchdown wind information in a picture. - quickly show the graphical landing chart. - Now with statistics: top 5 Countries, Cities and Airports Requirements: Computer with vista or higher and internet access. Microsoft .net framework 4.6 or higher.(free download on microsft.com) Flightsimulator FSX or 2004 and FSUIPC installed. Note: requires paid activation for full use. Register and you have 1 month free. Program fully works without registration at airport Athens and Iraklion (Greece)
Posted Mar 2, 2019 14:01 by Evander Tholen
 
FSX/P3D Robin DR400 Pack 3
FSX/P3D Robin DR400 Pack 3
FSX/P3D Robin DR400 Pack 3 (Category: FSX > Props)
30.18Mb (399 downloads)
FSX/P3D Robin DR400 Pack 3. All private liveries: F-GNNK (Aeroclub Montendre-Marcillac, Gironde, France), OE-DFS, and HB-KFY (LSMF, Motorfluggruppe Mollis, Switzerland). Original DR400 Robin model and VC by Yannick Lavigne, Fred banting and Rob Young, converted to FSX native by Bluebear. I included the textures by Christian Daboudet, Pascal Kuffer as well as the converted textures by Bluebear. Converted new textures to DDS format and added small shine. Edited panel to fix non compatible gauges. Famouse for it's bent wing, The Robin DR400 is a wooden framed light aircraft made in France and commonly used by flight schools as well as private pilots. Assembled and tested in P3Dv4.2 by Chris Evans Should also be fine in FSX and earlier P3D versions.
Posted Mar 2, 2019 12:49 by chris evans
 
KTVC, Cherry Capital Airport, Michigan
KTVC, Cherry Capital Airport, Michigan (Category: FSX > Scenery)
0.21Mb (105 downloads)
KTVC, Cherry Capital Airport, Traverse City Michigan USA, for FSX. New setup of this airport. I used FreeMeshX for mesh. Tim van Ringen
Posted Mar 2, 2019 11:49 by uploader
 
Carenado P3D/FSX Cessna 172 floats Textures
Carenado P3D/FSX Cessna 172 floats Textures
9.80Mb (40 downloads)
Repaint for the Carenado Cessna 172 floats / OH-CTL.
Carenado - C172N Skyhawk II -On Floats for FSX and P3D Link to product
Posted Mar 1, 2019 12:53 by Enrique Medal
 
FSX/P3D Boeing 787-9 United Airlines Package
FSX/P3D Boeing 787-9 United Airlines Package
FSX/P3D Boeing 787-9 United Airlines Package (Category: FSX > Civil Jets)
123.97Mb (1117 downloads)
FSX/P3D Boeing 787-9 United Airlines Package. Based in Chicago, United Airlines is one of the world's largest airlines with a fleet of over 750 aircraft flying globally. As of March 2019, United operate 25 Boeing 787-9 with a further 13 on order. The high quality Boeing 787-9 from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. The VC is the Alejandro Rojas Lucena/FSND fantastic Boeing 737-800 VC cockpit blended with Ken Wiggington's revisions for the default B737 VC to make it more resemble a 787 plus added HUD. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT, HGS. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing sounds included for that extra realism. I added the professional textures by the aircrew. Fixed views, wheel levels. Added wing views. Added 787 checklist. TDS high spec. native FSX Boeing 787-9 model. See VC docs to get the best out of the VC and FMC. Tested in P3Dv4.2 and should also work in earlier P3D & FSX. Packaged by Chris Evans.
Posted Mar 1, 2019 11:40 by chris evans
 
Nakajima Ki-43 Hayabusa
Nakajima Ki-43 Hayabusa
Nakajima Ki-43 Hayabusa (Category: FSX > Vintage)
27.37Mb (400 downloads)
FSX / P3D v3 Update of Nakajima Ki-43 Hayabusa (peregrine falcon). This was a fighter single-engine tactical used by the Imperial Japanese Army Air Service during the WWII. Its official designation of the Japanese army was Hunting Type 1 and its code name for the Allies was Oscar, but American pilots used to call the Army Zero (Army Zero) for its resemblance to the Mitsubishi A6M Zero of the Imperial Japanese Navy. Its designer was Hideo Itokawa, who would later become famous as the pioneer of Japanese rocketry. On the model of Akemi Mizoguchi make improvements in VC cockpit, gauges, propellers, and other details. All the merit to its creator and to enjoy ....
Posted Mar 1, 2019 00:27 by Valery Rodolfo
 
Kawanishi J6K1 Jinpu
Kawanishi J6K1 Jinpu (Category: FSX > Vintage)
10.92Mb (355 downloads)
FSX / P3D v3 Update of Kawanishi J6K1 Jinpu. This would be a conventional interceptor developed to meet Japanese needs during the war. It would initially be powered by a Nakajima NK9A0 (HA45-42) a radial piston engine, with forced cooling and a three-speed mechanical supercharger in the nose; the engine would have four propellers. However, the project has changed and the aircraft would be powered by a Homare 42 engine. The cab was designed to have a single seat and adjusted behind the engine in the typical manner. Engineers estimated a maximum speed of up to 685 kilometers per hour, with an exceptional range of about 5.5 hours and a capacity to fly to a maximum height of 10.060 meters. On the William Dickens model, make changes in flight characteristics, VC glass and gauges, propellers and others for use in FSX up to P3D v3. Thanks to the author of this magnificent model and to enjoy ...
Posted Feb 28, 2019 12:41 by Rodolfo Valery
 
FSX/P3D3 Yokosuka D4Y Suisei
FSX/P3D3 Yokosuka D4Y Suisei
FSX/P3D3 Yokosuka D4Y Suisei (Category: FSX > Vintage)
24.23Mb (408 downloads)
FSX / P3D v3 Update of Yokosuka D4Y Suisei (comet). This was a dive bomber of the Imperial Japanese Navy. The code of the allies was Judy. The D4Y was one of the fastest dive bombers of the entire war. Despite its limited use, its speed and autonomy made it effective in reconnaissance missions as well as in kamikaze attacks. They were built in several versions up to a total of 2,038 copies, mostly by Aichi. On the CFS2 model of Thicko, make changes of VC cockpit and glass, gauges, propellers, and flight characteristics for its operation in FSX up to P3D v3. All the merits and thanks to its creator. Original textures by Morton. Enjoyment.....
Posted Feb 28, 2019 11:21 by Rodolfo Valery
 
SEPECAT Jaguar M
SEPECAT Jaguar M
SEPECAT Jaguar M (Category: FSX > Military)
41.95Mb (790 downloads)
SEPECAT Jaguar M for FSX and FS9 with changes and additions. The Jaguar M was intended to operate from an aircraft carrier, his structure had been strengthened accordingly, also was equipped with a modified landing gear. The nose gear was lengthened and the main gear consisting of a single wheel. Developed by Sepecat (Dassault-Breguet and BAC). Author: Tsyntsar Victor, Kyiv, Ukraine, 2019. Model version 2.0
Posted Feb 28, 2019 09:15 by Tsyntsar Victor
 
FSX/P3D Native Robin DR400 4 More Livery Pack 2
FSX/P3D Native Robin DR400 4 More Livery Pack 2
33.39Mb (473 downloads)
FSX/P3D Robin DR400 4 More Livery Pack 2. All private liveries: F-GNNR (Annecy-Meythet (LFLP)), F-GCIJ (aeroclub Rouen-Normandie), D-EGVZ and G-BZIJ. Original DR400 Robin model and VC by Yannick Lavigne, Fred banting and Rob Young, converted to FSX native by Bluebear. I included the textures by Nicolas PESSAY, Mike Formatschek, Patrick Machabert as well as the converted textures by Bluebear. Converted new textures to DDS format and added small shine. Edited panel to fix non compatible gauges. Famous for it's bent wing, The Robin DR400 is a wooden framed light aircraft made in France and commonly used by flight schools as well as private pilots. Assembled and tested in P3Dv4.2 by Chris Evans Should also be fine in FSX and earlier P3D versions.
Posted Feb 28, 2019 08:56 by chris evans
 
 
... 5 6 7 8 9 10 ...