FS2002/2004 New York State Thermals Scenery. By Francisco Vargas. 33K

FS2002/2004 Lincoln update, Nebraska Soaring Scenery This file adds some thermals to default Microsoft scenery for Dream Field(NE42), Lincoln City Region , Nebraska,USA. By Francisco Vargas. 60K

FS2004 David Bushell.SR-71A Update. This is an update of the SR-71A Blackbird by David Bushell found here. I have redone the flight dynamics, put in all 8 wheels, added some nav lights, smoke effects, and afterburner effects. I am including a panel for it by Michel Polski, that I modified. It is more functional than the one that comes with it. There are files included which allow this update to work in FS2002 as well as FS2004. When installing older files in FS2004 - when asked to disable non compatible components - click NO. Bob Chicilo. 80K

FS2004/2002 FG-1 Phantom II. Updated - with added panel, lights, afterburners, smoke effects, and re-worked the air and aircraft.cfg files. I presently can do nothing about the virtual cockpit or anything else that is in the mobel file. This aircraft has two models, one with, and one without external tanks. Aircraft by Alphasim. Update by Bob Chicilo. 2.6MB

Messerschmitt Bf 109E-1 by Design Team Daedalus Unit: 9./JG26 March 24 1940 St. Inglvert France Pilot: Fw. Artur Beese To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109 series. In late 1938, the Bf 109E entered production. It entered general service with the Luftwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. There were many small differences between individual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc., but changing the wing MG17 armament required new different wings. So each model we have created has its own unique features. This aircraft had a flat plate pilot head armor retrofitted. By the time the later Bf 109E-4 and Bf 109E-7 marks were equipping the Jagdgeschwaders a program was initiated to withdraw and remanufacture the surviving E-1s to either full E-4 or E-7 standard. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf109G-10/U4 WNF built by Design Team Daedalus Unit: 11./JG52 Deutsch Brod May 1945 Pilot: Unknown The Bf109G-10 was an attempt by the RLM to standardize the Bf109 sub-types using the new DB 605D engine fitted with MW-50 (methanol water 50/50 mix) boost giving an increase to 1775hp. However this attempt was a massive failure and there is no "standard" Bf 109G-10. The only consistent features were the use of the "Erla Haube" canopy and a version of the DB 605D engine requiring a streamlined cowling to cover the larger engine configuration. The Erla factory used a completely different engine cowling type with the port side featuring a rectangular fairing behind the engine and an ellipse shape on the starboard side. The WNF and Regensburg plants used an ellipse shape on both sides and had small chin bulges. Regensburg production seems to have been mostly conversions of existing G6 and G-14 airframes. Most used larger main wheels which required the larger rectangular shaped upper wing fairings, but some used the smaller wheels with the smaller teardrop shaped upper wing fairings. While all had the tall horizontal tail type, they used different rudder types. Different types of oil coolers, tail wheel struts, antenna masts, etc. from subcontractors were available at different times during the production runs. Armament was different too. The WNF built G-10s were the G-10/U4 subtype using a 30mm cannon in the nose rather than the 20mm used in the Erla and Regensburg built models. Given the many different features that existed on individual G-10 aircraft, each model we have created has its own unique features. Pstrany began the development of the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-10/U4 WNF built by Design Team Daedalus Unit: Unknown - abandoned Prien, Germany 1945 Pilot: Unknown The Bf109G-10 was an attempt by the RLM to standardize the Bf109 sub-types using the new DB 605D engine fitted with MW-50 (methanol water 50/50 mix) boost giving an increase to 1775hp. However this attempt was a massive failure and there is no "standard" Bf 109G-10. The only consistent features were the use of the "Erla Haube" canopy and a version of the DB 605D engine requiring a streamlined cowling to cover the larger engine configuration. The Erla factory used a completely different engine cowling type with the port side featuring a rectangular fairing behind the engine and an ellipse shape on the starboard side. The WNF and Regensburg plants used an ellipse shape on both sides and had small chin bulges. Regensburg production seems to have been mostly conversions of existing G6 and G-14 airframes. Most used larger main wheels which required the larger rectangular shaped upper wing fairings, but some used the smaller wheels with the smaller teardrop shaped upper wing fairings. While all had the tall horizontal tail type, they used different rudder types. Different types of oil coolers, tail wheel struts, antenna masts, etc. from subcontractors were available at different times during the production runs. Armament was different too. The WNF built G-10s were the G-10/U4 subtype using a 30mm cannon in the nose rather than the 20mm used in the Erla and Regensburg built models. Given the many different features that existed on individual G-10 aircraft, each model we have created has its own unique features. Pstrany began the development of the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

P3D-Scenery-Nephis-Red Bull Air Race Chiba 2018. SMOKE ON! Fly the very iconic Japan track of the Red Bull Air Race in Chiba. Scenery by Christophe. Made in Nephis Airlines.

The Station opened in 1942 before closing in 1946, it hosted No. 431 Squadron, Royal Canadian Air Force as part of 4 Group RAF Bomber Command which formed at the airfield on 13 November 1942 flying Vickers Wellington Mark X aircraft while at Burn. On 15 July 1943 the squadron was transferred to RAF Tholthorpe and became part of No. 6 Group RCAF. On 1 January 1944 No. 658 Squadron RAF moved to the airfield from RAF Clifton flying the Taylorcraft Auster III but left only seven days moving to RAF Doncaster but on 21 January 1944 the squadron returned, this time staying until 14 March 1944 when they moved to RAF Collyweston. The squadron was briefly joined on 31 December 1943 by 659 Squadron which moved to RAF Clifton the following day. During its use the airfield was also used by No. 10 Aircrew Holding Unit RAF. On 6 January 1944 No. 578 Squadron RAF squadron was relocated to RAF Burn from RAF Snaith. This Bomber Command squadron flew Handley Page Halifax Mk. III before disbanding on 15 April 1945 and the station was closed for flying operations in July 1945. On the night of 30 March 1944, Pilot Officer Cyril Joe Barton took off from RAF Burn in Halifax LK797 for a raid on Nuremberg, and won a posthumous Victoria Cross for valour. Shortly after flying was discontinued, the Royal Army Service Corps took over some facilities to store surplus equipment. ] Many of the buildings have been dismantled but all three runways remain intact and are used by Burn Gliding Club Ltd.

CFS Scenery Add-On "Aquino" for Combat Flight Simulator 1 © Edmundo Abad, The "Aquino" scenery is aproximately fictional. Shows the current airfield buildings distribution, but as a Regia Aeronautica Airfield during WWII. I am only based on current maps and wartime pictures. Currently, this airfield are Military Airport open to civil authorized air traffic. The airfield is located near Cassino village to south east of Rome on Liri River Valley, the runway are 15/33 in grass with 950 m. 1.1MB