Mustang MK IV from the RCAF 442nd Squadron by Josh "Stonewall" Stuart . It is important to read the information included. Research material were used to make the aircraft as accurate as possible. They are used at your own risk. They have been extensively tested in CFS3 and work perfectly. Enjoy an alternative to the default aircraft included in the original sim. 1.2MB

FS2004 Gauge: VTOL for Helicopters This package contains a VTOL control gauge for FS9 Helicopters, that works around some FS9 limitations and/or incorrect flightdynamics, which makes them sometimes hard to control them; especially at low airspeed and when you have your Realism sliders set above minimum. It provides: - Smooth and stable VTOL capabilities, with pilot-controlled ascent/descent rate, longitudinal and lateral speed, heading, pitch and bank. - Works also in windy conditions. - Automatic activation below 25 Knots IAS, so does not influence the aircraft's flight characteristics in normal flight. - Adds an Autohover/Autopilot function. It requires prior installation of FSUIPC. Fully documented and easy to install in your panel; includes a list of tested helicopters (see README). NOT FOR FSX ! By Rob Barendregt. 36K

Concorde panel (fs2002) This panel is equiped with many overhead panels (like a fuel window, warning window and more!). The panel has also all the internal views! This panel is tested in the follow resolutions: 800x600, 1024x786 and 1600x1200! The panel has also night effects! Included programs are: INFO CENTER 2.0, Flightsim.bat and some winampskins. By Frank Elfert.

FS2004 Binh Thuy Airfield Vietnam late 60's Scenery. A model of Binh Thuy Airfield as it appeared in the late 1960's at the height of the Vietnam War. Binh Thuy was a major airbase in the Mekong Delta about 7 miles northwest of Cantho. It was the home of the 632nd Combat Support Group. There is a modern airport (Tra Noc) at the same location in FS 2002. The airport code for Tra Noc is VVCT, whereas the code for Binh Thuy was VVBT. This scenery was designed for FS 2002 but it should work in FS 2004. George Knowles. 521K

This is a fictional repaint for Brett Henderson´s freeware Beech P35 Bonanza V-Tail. You need the freeware Beech P35 available above (corrected version!)

This is the second version of my previous CFS2 guns release. After it was posted, I've waited for comments and suggestions from users because nothing is perfect and it's always good to improve, since many heads are better than one. Some users kindly suggested to me to make all wave files stereo. Some original CFS2 guns were already mono so I thought beforehand it was not that important (the fifty cal. is mono in CFS2). But of course, if we have to do it, let's do it the best possible. I found it both challenging and exciting. So I did my homework and here they are !! the full stereo wave files !! I hope they will fulfill all your aerial needs. By Serge Tremblay.

Upgrade to the default FS2004 to create Grimaud Heliport in St Tropez,France

FSX/P3D (Incl.v4.*) Boeing 727-100F Heavylift Package. Heavylift is an Australian cargo airline based in Los Angeles due to Australian ban on B727/737 stage III aircraft. Boeing made the classic 727-100 between the early 1960's to 1984. It has a max. range of 2700nm. Boeing 727-100 model by TDS/ Tenkuu Developers Studio with Thomas Ruth's great Boeing 727 VC added. Includes utility for ground services, Passenger bus, cargo, stairs, refuelling truck etc (find it under - Views - Instrument panel - Util) The wonderful native FSX Boeing 727-100 from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. The revised Thomas Ruth VC includes working wipers, Honeywell FMC and more. See Panel manual for more info. I have added the high quality textures by Pauyl Winn. Model is not modified in any way. Thomas Ruth VC added and aircraft.cfg edited to allow correct VC views. TDS wonderful native FSX Boeing 727-200 model. See panel docs to get the best out of the VC. Zip preview for more imgages. Tested on P3Dv4 and should be ok in FSX and earlier P3D versions by Chris Evans.

Charlotte/Douglas Intl (KCLT) North Carolina. This is an update of Ray Smith's file kclt_rs_fsx.zip, modified with his permission, Ray has also given permission to upload this update to FlightSim.Com. This airport update is for KCLT with two optional files made only for FSX: one version with the Crosswind runway 5/23 activated and in full operation where all 4 runways will be used for takeoff/landing and one version as the default runway operation: assigned parking updated as per their website which now includes gates for American airlines as well as US Airways for those using older flightplans, taxiways and taxi signs updated to the latest charts, helipad included, extra fuel trucks, support vehicle roads rebuilt and many other scenery improvements added, airport views are from the roof of the control tower (when in tower view) please view the readme before installation. By Craig Scott

"imp" means imperfect, as other mesh I have already processed is of areas that have very little vegetation cover - over the land, or has large urban areas. This "imp" mesh will include some slight discrepancies of altitude (in the case of forested areas - by a magnitude sometimes of +15 metres-depending on how tall the trees are, in the jungle or forest canopy) over urban areas, or areas with a lot of vegetation cover - due to the limitations of the ASTER satellites infra red scanning cameras, and the software used to process the DEM data. Areas where there is little vegetation cover, or non urban areas, the terrain should have truer values. But I feel this ASTER DEM data is so good - why let it all go to waste - especially flying over lovely Pacific islands? So you FSX users out there will have to take all this into account when using this mesh. Grateful thanks to ERSDAC, and NASA for making this data freely available to the public. ASTER GDEM Copyright (c) 2009 - 2011 Earth Remote Sensing Data Analysis Center (ERSDAC) All rights reserved. ASTER GDEM is a product of METI and NASA.